Skip Navigation (Press Enter)

'70s Rock Van Clear Body

for 12.3" (313mm) Wheelbase Scale Crawlers

  • SKU: 3552-00
  • 43.95 USD$43.95
  • List Price: $50.95
  • You save: $7.00

Promo

  • Buy a Crawler Body Get a 6073-00 FREE

FREE Scale Accessory!

This is a '70s Rock Van Clear Body for Scale Crawlers. It's time to get your retro creative juices flowing with the new Pro-Line '70s Rock Van body! Based on the iconic Vans of the mid-late 1970s, the Rock Van provides a blank canvas to recreate the most awesome vans of yesteryear. From cable news vans, to ice cream trucks, to overlanding rigs, to transporting around your favorite team of ex-US Special Forces: the possibilities are endless!

The '70s Rock Van features super-detailed front grille sections, oversized fender flares, and two sets of add-on Bubble Windows, porthole and teardrop, to give your van the ultimate retro look. The decal sheet also includes a full set of yellow & orange pinstriping. Just paint it in your favorite solid color and you are ready to go. This body fits all popular 12.3" wheelbase crawlers outfitted with 2 sets of tall body posts.

Pro-Line's team of innovators are also offering some Exclusive 3D BONUS Scale Parts, available for download, free of charge! Click the links below to grab 3D files to print-at-home on your 3D printer or send to an online print shop such as Shapeways and add even more scale detail to your Pro-Line Rock Van:

The Rock Van is molded in our durable .060" polycarbonate and comes with window masks, Paint-then-peel overspray film and decals to finish off the look. Get Vanning with your own Pro-Line '70s Rock Van for your 12.3" Crawler now!

Don't forget to submit your finished Pro-Line body to Reader's Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!

©2020 Pro-Line Racing. SCX10™ and Ascender™ are trademarks or registered trademarks of Horizon Hobby®, LLC. All other trademarks, service marks and logos are property of their respective owners.
Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only unless otherwise noted.

Click Here for painting tips

Search:
3552-00 | '70s Rock Van Clear Body for 12.3" (313mm) Wheelbase Scale Crawlers

  • Blank Canvas to Inspire Creative Builds
  • Based on Iconic 1970s Vans
  • Add-on Bubble Windows for Extra Retro Style
  • Four steps to Van Ready:
    1.) Clean Body and apply included window mask
    2.) Paint then peel the over-spray film off
    3.) Sticker your body (decal sheet included)
    4.) Mount your new body onto your crawler
  • Made in the USA, since 1982 - Read about Pro-Line Racing's History

  • '70s Rock Van Clear Body (1 pc)
  • Detailed Decal Sheet
  • Window Masks
  • Paint-then-peel Overspray Film Included

Length:    20.25" (514mm)
Width:    8.2" (208mm)
Height:    6.5" (165mm)
Wheelbase:    12.3" (312mm)
     
     
     

Recently Viewed

Product Ratings and Reviews

Add a Review

5.0 out of 5 stars
  • Friday, July 3, 2020
  • Shelby
This van body rocks! Excellent quality & design! I did an outside of the body weathered paint job using the window masks on the outside, then carefully peeling them after it dried & reapplied them to the inside for a black inner coat. I did have an issue with the windshield mask being too small, both lengthwise & height, so I simply used masking tape & gently cut with an x-acto. I initially thought the windows would be glued to the outside of the body, but after holding them to it, I noticed that the body had a slight curve to it & they windows wouldn't lay flat. I used the bubble windows rather than the tear drops because I figured it would be easier to cut the body holes out using curved scissors. Using a reamer, I made a starter hole, then cut out a hole using the curved scissors about a quarter inch smaller than the round window mask. Using med sandpaper, I continued sanding the new holes until they just fit the bubble window poking through from the inside. Lastly I added some tint to the bubbles before using ca glue to lock them in place. Once that was done I added chrome details around the bubble windows & to all the hinges. I also used the headlight & taillight stickers as masks & applied chrome to the headlights & translucent red to the taillights as a final step. I am extremely pleased with how this body turned out! Now I just need to print the 3D accessories & install it on my chassis. This is definitely one of my favorite crawler bodies!
  • Tuesday, June 16, 2020
  • William
  • Desert Hot Springs, CA
received this van a couple weeks ago and couldn't be happier. However I am afraid to jump into it because I was hoping for a "how to" video on installing the windows. I love this body so much I really don't want to mess it up. Some simple instructions or a how to video would be greatly appreciated.