BLOG HOME   |   MEET THE TEAM   |   SUBMIT YOUR RIDE   |   ABOUT PL   |   CONTACT US    |   P-L GALLERIES    |   SWEEPSTAKES

RSS Feed | Log in

Posts Tagged ‘roar’

ethanroar2

Saturday March 4th was the first race in the ROAR Region 2 tenth scale points series in Winchester, VA at Adrenalin RC.  The unusual weather in the northeast with high temperatures of thirty seven degrees would prove to be a challenge for the drivers. The event gathered 70 entries to battle it out to see who could get traction and maintain the feelings in their throttle fingers.

Ethan entered the event in the two and four wheel drive modified buggy classes.

Both of his buggies were equipped with Pro-Line Transistors in the front and Hole Shot tires in the rear in M4 compounds.

After 3 rounds of qualifying, Ethan would start in the top qualifying position for both classes and complete the sweep of A-Mains, finishing first in both features.   Read the rest of this entry »

READ Posted by: Jason Mackanick in Factory Team, Race Events

14046045_1795276880707340_8201635162009804060_n

Race: 2016 ROAR 1/10 Nationals
Date: August 2016
Classes: 2WD Mod / 4WD Mod / Truck Mod
Qualifying / Finish
: 15th:12th / 5th:10th / 2nd:3rd
Products Used: MC Electron Truck / MC Electron Front / MC Electron Light Rear / All Pro-Line Foam

Weekend Recap: I drove up Wednesday morning and would get there for the 10am start time of open practice. Wednesday would be open practice, Thursday controlled (seeding) practice, Friday Q1 and Q2, Saturday Q3 and Q4, and Sunday all the Mains. The track looked good, pretty technical, but nothing too difficult, looked good for racing as well. I was starting with my car setup’s just like how I left the last day I was racing up there in July. I had my tires all mounted and my whole game plan for the week ready to roll. I hit the track and the first day didn’t seem to go as I had thought. I searched for traction ALL day, I just never felt in the track, and it was getting frustrating. I knew my setups were close, and the other top P-L drivers were going good, I didn’t know what was going on. This track is all about tires, so I figured that must be where my issue is. I had my game plan on my tires, break them in on the drill, only using a rag with sauce, and then a dry rag to get them hot. It just wasn’t working though. Read the rest of this entry »

READ Posted by: Pro-Line Graphics Team in Factory Team

IMG_14661632833893

On August 9th I ran the ROAR Region 8 race.

I ran Nitro Truggy and 4WD Short Course.

In Truggy I qualified 3rd in the A-Main behind 2 other Tekno team drivers.

I ran a very clean race and 18-minutes in of a 45-minute main I was in 3rd a lap ahead of 4th.

When I came in for a pit stop my pit guy accidentally spilled a bunch of fuel in my truck causing it to flame out. Once we got it started I was in 4th a lap down from 3rd. I did manage to get the lap back and ended up finishing 9 seconds off of 3rd place taking the 4th place spot.

I ran M3 Hole Shots the entire day.

In Pro 4 I qualified 2nd behind another fellow Tekno team driver after 3-Mains and a couple small mistakes I ended up taking 3rd overall.

– Josh Havens

READ Posted by: Pro-Line Graphics Team in Factory Team, Race Events

This year’s 1/10th ROAR Nationals was a huge success for the Pro-Line Team and the X2 Compound. A quick walk through the pits and it was clear the X2 compound was the tire of choice for many.

In 4wd Modified, Ty Tessmann would TQ and take the overall win in A1 and A2, giving him the overall championship.

Modified Truck would see Dakotah Phend as Top Qualifier however, Jared Tebo would take the win on Pro-Line’s X2 tires.

In 2wd Modified, Dakotah Phend with his Rear Motor car would win A1 and A2 to claim the National Title.

Pro-Line would like to thank the staff at Silver Dollar Raceway for hosting a great event. All of our team drivers who made the trip to support Pro-Line and of course our customers for another great Nationals. Back to Chico in 6 weeks for the World Championships!

READ Posted by: Pro-Line Graphics Team in Factory Team, Race Events

TLR and Pro-Line driver Dakotah Phend has won both the 1/8-scale Electric Buggy Class and 4WD SCT class with the just-announced 8IGHT-E 3.0 and TLR TEN-SCTE 2.0 on Pro-Line Hole Shot M3 tires at the 2013 ROAR Electric 1/8-scale Nationals which took place at LCRC in Oakland Mills, PA from the 1st to the 4th of August.

Phend doubles at ROAR Nat Champ

Source: NeoBuggy.net

READ Posted by: Pro-Line Graphics Team in Factory Team, Race Events