Customize your Twin Hammers with Pro-Line
The Vaterra Twin Hammers is one of the latest installments of Rock buggy / Racer vehicle that has taken the industry by storm. It balances the cross over from Rock Crawler to Rock Racer and even a Baja Style race vehicle. There are so many options and so many directions you can go in detailing it and Pro-Line has all the cool upgrades and accessories to help you put the finishing touches on this awesome looking scale rig!
First off, I removed the stock Body Panels, Wheels and Tires. I first noticed that the Hex drives to not fit that well to the wheels so I installed 2x pair of our 6098-00 PRO-2 Rear Clamping Hex’s and also added 2x pair of our 6100-00 4mm Serrated Wheel lock nuts. These modifications will hold the wheels firmly in place with a tight fit.
For a wheel Tire combination, I choose our 1182-01 Badlands SC Tires and mounted them up to a set of 2725-03 Renegade SC wheels. This combination is also available pre-mounted by ordering part number 1182-13.
Turning to the body selection and details, I decided to add our 3238-40 Baja bug body. Steve Burges from Rugspin Graphix applied the base Falken paint scheme (Awesome Job) and I finished it off with Falken and the P-L Decal sheets. For the finishing touch, I applied my desert weathered pain treatment for a more realistic look.
The 3238-40 Baja Bug body is not a direct fit to the Twin Hammers. You will need to narrow the cage cross member directly above the battery compartment. I trimmed just enough off the cross member so the cage was pulled in to align with the body in the areas where I trimmed it out as shown in the photos. It fits really snug but with a little effort it can be made to work.
After some trimming I next added our 6085-00 Performance Off-Road Crawler / Desert Truck Light bar kit for the light bar, I made custom mounts by using Axial angled rod ends and a longer set screw’s to join them together.
Next I decided to finish it off with some of our scale crawler accessories. I used the battery and Power inverter from our #6074-00 Assortment #6 to simulate an ignition box and the fire extinguisher from our #6075-00 Scale Assortment #7, and the Jack, Shovel and Pry Bar from our #6045-00 Assortment #2, Impact Gun and Hammer came from assortment #5 6073-00, and finally the Nitro Bottle and fuel Pumps from our #6105-00 Assortment #8
No matter what rig you are building, you really need you check out our Scale Accessories assortments. We offer over 8 different Scale Accessories assortments, Bumper sets, Roof Racks and Light bar combinations. No other company offers you this much variety in scale / highly detailed accessories to fully detail your rig.
Putting the final touches on the Twin Hammers, I added some K&S thin aluminum sheeting for fabricating the role cage interior side panels. I also fabricated the dual rear tire rack by removing the stock single rack and trimming the two rear cross bars from the sub assembly.
I secured a pair of the 1182-13 Badlands Pre mounts by running one cross bar though the center hole and the lower one though the lower spoke and tightened them up. It is best to tighten one side of both the upper and lower tube before installing the tires. This makes it easy to tighten the other side securely.
The Vaterra Twin Hammers is an awesome looking rig. It is possibly one of the most versatile platforms from which you can create many different types of trucks