BLOG HOME   |   MEET THE TEAM   |   SUBMIT YOUR RIDE   |   ABOUT PL   |   CONTACT US    |   P-L GALLERIES    |   SWEEPSTAKES

RSS Feed | Log in
Sep 2015
10

Pro-Line Transforms Axial Racing’s AX-10 Deadbolt to “Monster Bolt”

Since the early 80’s, RC Monster Trucks have been a fascination part of the RC community. Their Popularity comes and goes but one thing is certain, they are here to stay. Monster Trucks are currently experiencing resurgence as of late and Pro-Line is no stranger to them.  Our offerings that go back just as far as the original Tamiya Clod Buster of the Mid 80’s. With the most recent release of our new #10114-02 2.6” Destroyer Monster Truck TiresPro-Line renews that passion again and usher in a new era of Monster Truck performance tires. To commemorate these new products, we have created a series of custom builds. “Monster Bolt” is our high performance racing version incorporating today’s technology into the enduring passion of Monster Truck racing from the past and present.

Overview

“Monster Bolt” started out as a AX10 Deadbolt roller purchased from a RC parts recycler off EBay. There are many sellers that basically take new RTR vehicles and strip them selling sections of the truck. This is perfect for custom builds when you wan the chassis but want to take different / higher performance directions in the build saving money for these parts.

01

Suspension

Upon purchasing the AX-10 Deadbolt chassis, stock Yeti rear suspension arms and a host of Axial / Vanquish suspension upgrade components were sourced for the build. The Axial Racing Yeti lower rear suspension arms were re-enforced with AX31245 Lower Link Plate sets and AX30830 Wraith AR60 OCP Machined Link Mounts for maximum strength. Titanium upper link sets from Vanquish were installed to keep the axles stable under heavy acceleration. Pro-Line Pro-Spec 6308-30 Front / 6308-31  Rear shocks were added to the front and rear suspension. The Pro-Spec Shocks are a 12mm Big Bore, Low Friction design incorporating an X-Ring style Seal system for ultra smooth operation. A set of KBess Manufacturing KBM-YTVLU Yeti Blue Suspension limiter Straps were added for the final touch.

D11

Axles:

The AR60 OCP Deadbolt axle’s OEM gears were upgraded to AX30395 38T/13T HD Bevel Gear Set’s.  The HD gears were mounted Hot Racing’s  SCP125R Unibody Super Heavy Duty Differential Lockers.  The diff housings were then sealed up with RC4WD Z-S0360 Poison Spyder Bombshell Diff Covers.

D19D10

 Performance Note: When running in Dirt, You can overdrive the front axle with the AX30402 43T/13T Gear set. This will give the truck better drive though when corning / tighter turns on dirt tracks. This modification should NOT be used when running on surfaces like Concrete or Asphalt.

D04

The exterior of the axle housings were updated with a Vanquish VPS06509 Stage 1 Kit and the front axles replace with  VPS07370 VVD V1-HD shafts. AX30830 Wraith AR60 OCP Machined Link Mounts were installed to give the suspension maximum adjustability. For the finishing touch, a set of custom made trusses with built in skid plates from BGR Fabrications ties everything together to give the axles bulletproof strength.

D16D15

Transmission:

The transmission was updated with a Vanquish  VPS01183 Aluminum case and a Hot Racing SCP1000T Hard Anodized gear set. A Tekin TT2528 – Pro4 HD 4300kv 550 4X4 SC Motor was selected and bolted up to a AX30860 Machined Motor Plate. The gearing was updated with a Hot Racing SWRA257 32 pitch 57T spur and Axial AX30841 32 pitch – 15T pinion. The sub assembly was then bolted to an Axial AX31100 Aluminum Skid plate and mounted into the chassis.

D06D08D07

Chassis:

The front radio box and tray was removed and replaced with a second / forward battery tray to which the Orion Carbon Pro Battery was given a forward mounting position. A TT2301 – RX8 GEN2 Electronic Speed Controller and Airtronics receiver was then mounted in the rear battery tray position (Battery was moved to a forward mounting Position). Upgrade Parts such as the AX34401 Shock Tower Braces and the AX31099 Aluminum Upper Link Capture plates were added for additional rigidity in key area’s.

D14D13

The AX80118 battery tray is universal front to rear so you can buy a second spare one and mount it in place of the stock receiver box / mounting tray. Adding a forward battery tray also gives you a mounting point for the front sway bar. Wraith AX30781 Front and AX 30782 Rear Sway bar sets were added to keep the suspension and chassis stable. The center shafts were shortened and re-keyed to match the Deadbolts chassis narrower profile.

D20D21D12

Wheels and Tires:

Once the chassis and drive line was finished, a set of 6098-00 PRO-2 Clamping Hex’s were installed on the axle shafts and a set of 10114-02 Destroyer Tires were mounted to a set of RC4WD’s Z-W0147 Delrin Universal Monster Truck Bead Lock Wheels. Their Z-S0914 12mm Universal Hex Clod Wheel Adapters and Pro-Line  6100-00 4mm Serrated Wheel Lock Nuts help to secure the wheels and tires to the axles

D17D09

Body:

A custom painted 3252-00 Ford F-250 Clear Body by Steve over at RugSpin Graphix tops off the truck. Body mounts were custom made using the AX10 Deadbolt and AX80031 SCX10 Extended posts.

Conclusion:

You can start out basic and work your way up or go full bore like I did. No matter what your budget, The Axial AX10 Deadbolt is a great chassis that lends itself to multiple modifications of Monster Tuck Proportions. At the very bottom of this article there is a list of parts that were used to build this truck. You can use is as a starting point to source the parts and work towards your own Epic Monster Truck build!

D18

Thanks for reading and hope you enjoyed the article!

Parts List

Airtronics

90216 MX-V 2.4GHz Digital 3 Channel Pistol Radio

Axial

Axial Deadbolt Roller Chassis

AX30402 43T/13T HD Bevel Gear Set (Option Used for Overdrive of front axle on Dirt)

AX30830 Wraith AR60 OCP Machined Link Mounts (2x)

AX30860 Machined Motor Plate

AX30395 38T/13T HD Bevel Gear Set (2x)

AX30835 24T Aluminum Servo Horn for Hitec Servo’s

AX30841 32P – 15T Pinion Gear for 5mm Motor Shafts

AX30871 Wraith Front Sway bar set

AX30782 Wraith Rear Sway Bar Set

AX31099 Aluminum Upper Link Capture Plates

AX31100 AX10 Aluminum Skid Plate

AX31101 AX10 Aluminum Shock Tower Braces

AX31245 Lower Link Plate Set (2x)

AX80031 SCX10 Body Mount Parts Tree (Optional)

AX80118 AX10 Battery Tray / Skid Plate Parts Tree

AX80120 SX10 Deadbolt / Ridgecrest Body Mount Parts Tree

AX31114  WB8 HD Drive Shaft Kit – Plastic Parts Tree

AX31148 WB8-HD Driveshaft Coupler Set (2x)

AXA1422 7X25mm Post (Used for Front Sway Bar)

AXA1426 7X45mm Post (Used for Rear Sway Bar)

Hot Racing

SCP125R Unibody Super Heavy Duty Differential Locker (2x)

SSCP1000T Hard Anodized Aluminum Center Gear Set

SSCP1000X Hardened Steel Light Weight Gear Set (Optional)

SWRA257 Steel Super Duty 32P – 57T Spur Gear

KBess Manufacturing

KBM-YTBLU  Yeti Blue Limiter Straps 4 Pack

Pro-Line

3252-00 Ford F-250 Clear Body

6098-00 PRO-2 Clamping Hex’s (2x)

6100-00 4mm Serrated Wheel Lock Nuts

6308-30 Pro-Spec Pre-Assembled Front Shocks

6308-31 Pro-Spec Pre-Assembled Rear Shocks

10114-02 Destroyer 2.6″ Monster Truck tires

RC4WD

Z-S0360 Poison Spyder Bombshell Diff Cover – Wraith AR60 Axles (2x)

Z-S0914 12mm Universal Hex Clod Wheel Adapters

Z-W0147 Delrin Universal Monster Truck Bead Lock Wheels (2x)

Team Orion

ORI14066 Carbon Pro 7.4V 4500mAh 100C LiPo XS 93mm

Tekin

TT2301 – RX8 GEN2 Electronic Speed Controller

TT2528 – Pro4 HD 4300kv 550 4X4 SC Motor

Vanquish

VPS01183 SCX10 Aluminum Transmission Housing

VPS03215 Racing Ackermann Arms – Grey

VPS04311 Wraith HD Truss Set – Black

VPS06509 Wraith Stage One Kit – Black

VPS07370 Wraith VVD V1-HD